Minieye LED Light

Enquire
April 2011
application/pdf iconLED Minieye Data Sheet.pdf

The Minieye LED Light is specificially intended for a more decorative lighting feel, combinibng the effects of ecological efficiency, an increaningly calm light and dimmable application to create a superior LED system to its competitors. It is a 120/240VAC or 12-24VDC powered LED Light and controller for domestic and commercial building applications supplied in a stainless steel eyeball fitting of 55mm diameter where the light source direction can be rotated over 80 degrees in a single plane.

FEATURES

  • High intensity one watt LED with a 15 or 30 degree view angle
  • Available in blue, green, red, warm white or cool white
  • Dimming circuit incorporated in control module
  • When dimming is active, power consumption is reduced
  • Pulse width modulation control enables light to run cool
  • 120, 240VAC 47-63 Hz supply or nominal 12VDC
  • Low cost - High performance
  • Applications includes domestic housing and commercial buildings

The Mini-eye LED light is one of the most efficient light sources on the market that has been designed and manufactured to stringent specifications. It uses 25% of the power of a 20 watt halogen down light.

TECHNICAL SPECIFICATIONS

Light Source
A one watt high contrast LED (light emitting diode) with an efficient optical lens giving a light dispersement of 15 or 30 degrees. It is available in warm white, cool white, green, red and blue.

Controller module
A 120/240VAC powered control unit that uses a pulse width modulated control with feedback that controls the current flowing through the LED light source. This results in a light source that runs relatively cool, that can be dimmed and gives even further power reduction when dimmed.

Environmental Parameters
  • 0-70 degrees Celsius
  • 0-90% rh non-condensing
Connection Details
PCB mount 3 way screw terminal strip for power supply
Terminal 1:120/240VAC active supply
Terminal 3:Ground supply
Terminal 2:Neutral supply
 

PCB mount 6 way screw terminal strip for LED control
Terminal 1: LED positive supply
Terminal 4: potentiometer positive lead
Terminal 2: LED negative supply
Terminal 5: potentiometer wiper lead
Terminal 3: not used
Terminal 6: potentiometer negative lead

Power Supply
120/240VAC 47-63 Hz or 12VDC.

Weight
300grams.

Light fitting Mounting Details
Ceiling mounting stainless steel enclosure of case dimensions 55mm diameter by 25mm high with integral spring retaining clamp.

Controller Mounting Details
Surface mounting plastic enclosure of case dimensions 55mm diameter by 25mm high with integral spring retaining clamp.

Ordering Information
  • Model/input signal/display units/power supply/options
  • Sample number: LEDMI/60/100/240VAC
Enquire