• DI35H2

    Hover for detail


    Process Indicator

    The DI35H2 Powered Process Indicator is a 85 to 265VAC or 9-36VDC powered 2 digit (99 count) process indicator supplied in a panel mount enclosure with a 50mm high LED display which is range able in engineering units for millivolt, milliamp and voltage inputs. An optional 24VDC at 30mA loop supply is available for the direct connection of 2 wire transmitters.

    • Accepts all standard process signals
    • User rangeable in engineering units
    • Band gap reference
    • Differential input
    • 85 to 265VAC 47-63 Hz supply or factory fitted 9 to 35VDC supply
    • The DI35H2 has a 50mm digit height
    • Decimal point selection
    • The DI35H2 is supplied in a 96 x 96mm DIN enclosure
    • Transducer power supply of 8 to 23VDC for loop powered sensors and transmitters
    • Applications include the display of flow, level, pressure and speed

    The instruments have been designed to accept all the standard analogue process signals. The input measurement is shown on a high contrast LED display. The DI35H2 incorporates an LSI CMOS 2000 count dual slope integrating analogue to digital converter which is designed to reject electrical interference that normally abounds in industrial environments. The front panel of the DI35H2 series is sealed to IP65 and the instrument includes screw terminal electrical connection.

    Input Details

    The instrument has a bipolar differential input and a temperature compensated Band gap reference. Full scale ranges of 20mV to 200VDC 200uA to 2Amps and 4-20mA are acceptable.

    • A 2 digit high contrast light emitting diode (LED) with a wide viewing angle
    • The DI35H2 has a digit height of 50mm
    Decimal Points

    Three (3) position user selectable by touch button programming.

    Environmental Parameters
    • 0-70 degrees Celsius
    • 0-90% rh NON condensing
    Instrument Power Supply

    120/240VAC 47-63 Hz or DC to DC converter isolator from 9 to 36VDC.

    Transducer Power Supply

    An adjustable 8 to 24VDC 30mA transducer power supply is incorporated.


    DI35H2 is 450 grams.

    Mounting Details

    DI35H2: Impact resistant panel mounting plastic enclosure of case dimensions 96m wide by 96mm high by 99mm deep with a panel cut out of 91mm wide by 91mm high.

    Ordering Information
    • Model/input signal/display units/power supply
    • Sample number: DI35H2/4-20mA/0-99/VAC
    • All units shipped factory calibrated to 0-100.0