• ITW

    Hover for detail

    ITW

    Flow Totalisor with Wi-Fi

    The ITW Totalising System is an electronic flow totalising system which is powered from 12-40VDC or 85 to 265VAC with a six (6) digit 18mm LCD (liquid crystal) display and white LED backlight that incorporates a mobile broadband modem. The instrument can totalise flow, provide the excitation power supply for the flow sensor, output the total in real time to an Innovec on-line Dash-Board to display liquid volume, time, date, GPS position.



    • Simple touch switch programming with English statement prompts
    • Optional Quadrature input with reverse flow detection or single channel pulse train
    • Wi-Fi communication to an online database in real time, allowing for easily accessible data on flow levels
    • Bluetooth communication at 20 Metres or 300 Metres
    • Low cost - High performance
    • High contrast white Led backlit LCD display of with 6 characters of 18 mm high
    • Foreground, background total
    • Dip switch selectable input: turbine, reed switch, open collector, Namur & CMOS logic
    • Applications include chemical dispensing from a mobile tanker with volume, time, date, GPS position
    • Sensor supply that can be adjusted from 8 to 20VDC
    • Plug in screw terminal electrical connections
    • 85 to 265VAC 47-63 Hz supply or factory fitted 12 to 40VDC supply

    The ITW Totaliser is an 85 to 265VAC or 12-40VDC powered totalisor with batching capabilities for liquids that incorporates a six (6) digit 18mm LCD display

    Input Details

    The instrument accepts quadrature input with reverse flow detection or single pulse train input from 0 to 2KHZ and is dip switch selectable for open collector, reed, Hall, Namur and turbine signals (from 20mV peak to peak).

    Display

    The ITW incorporates a six (6) digit 18mm high segmented LCD display with white LED backlight with a wide viewing angle and a viewing distance of 5 metres.

    Totaliser Memory

    The instrument incorporates a foreground total and a background total that is stored in EEPROM memory during loss of power and. These values can be displayed by the front total touch button or viewed on the Innovec Dashboard.

    Low Flow Alarm

    The instrument incorporates a low flow alarm. If no input pulses are received in a user programmed period the low flow output is activated and LF ERR is displayed.

    Communication

    Communication is by a Mobile Broadband modem which is incorporated in the instrument to the Innovec Flow dashboard on the internet. The data is stored with time and date stamp. Historical data can be downloaded in Excel spreadsheet format.

    Environmental Parameters
    • 0-70 degrees Celsius and 0-90% RH non-condensing.
    • Front facia is weatherproof to IP65.
    Power Supply

    85 to 265VAC 47-63 Hz or DC to DC converter isolator from 12 to 40VDC. An adjustable transducer power supply of 8 to 24VDC at 30mA is incorporated in the instrument.

    Mounting Details

    Surface mounting IP65 polycarbonate enclosure of case dimensions 160 mm long x 80 mm high by 85 mm deep with fixing centres of 120 mm wide by 60 mm high.

    Totalisor Operation

    The ITW Totaliser is user friendly to operate. The K factor, decimal points and set point are configured from the front panel. The display total will increment in value. This data is output by Wi-Fi modem to the Innovec Flow Dashboard

    Ordering Information
    • Model/input/display/power supply/options.
    • Sample number ITW/INC/0-99999.9/24VDC.