• ISCX3

    Hover for detail

    ISCX3

    Signal Converters

    ISCX3 Din Rail Mount Signal Splitter and Isolator is a 85 to 265VAC powered instrument which accepts an analogue input of mA or volts and converts it to three independent isolated 4-20mA or 0-10VDC output signal. A 24VDC loop supply for the direct connection of 2 wire transmitters is included.



    • Din Rail or Gear Plate Mounting
    • 24VDC Loop Supply
    • Low cost - High performance
    • Power Supply of 24VDC or 85 to 265VAC
    • Signal and power isolation
    • 0.1% linearity
    • Low input impedance on mA signals
    • High input impedance on voltage signals
    • Custom input ranges on request
    The ISCX3 is a single analogue input to three independent analogue output signals

    The ISCX3 accepts many standard and non-standard input signals and generates a 4-2-mA or 0-10VDc output signal. Most other standard process signals are available on request.

    The ISCX3 because of its input to output combinations is a very versatile interface module. The ISCX3 can be inserted into existing systems without loss of performance

    Input Details
    • 0-1mA into 1000 Ohms
    • 0-10mA into 50 Ohms
    • 0-20mA into 25 Ohms
    • 4-20mA into 25 Ohms
    • 0-50mA into 10 Ohms
    • 0-1VDC into 100K Ohms
    • 1-5VDC into 100K Ohms
    • 0-10VDC into 100K Ohms
    Output Details
    • Operational Amplifier closed loop feedback circuit
    • Current output 4-20mA into 500 Ohms
    • 0-10VDC into 10K Ohms
    Performance
    • +/- 0.1% of span
    Isolation
    Power supply and three way galvanic isolation of 1500 Volts RMS with option EI. Standard instrument incorporates 3 way galvanic isolation to 500Volts RMS
    Environmental Parameters
    • 0-70 Degrees Celsius
    • 0-90% RH Non-condensing
    Connection Details
    Terminal 1: Input Low
    Terminal 16: Ground Supply
    Terminal 2: mA input high (+)
     Terminal 17: 0VDC or VAC Neutral supply
    Terminal 3: Volts input High (+)
     Terminal 18: 24VDC or 85 to 265VAC active supply
    Terminal 4: 24VDc Loop Supply
     Terminal 19: Not used
    Terminal 5: Not used
     Terminal 20: Not used
    Terminal 6: Not used
     Terminal 21: Not used
    Terminal 7: Not used
     Terminal 22: Not used
    Terminal 8: Not used
     Terminal 23: Channel 3 analogue output (+)
    Terminal 9: Not used
     Terminal 24: Channel 3 analogue output (-)
    Terminal 10: Not used
     Terminal 25: Not used
    Terminal 11: Not used
     Terminal 26: Channel 2 analogue output (+)
    Terminal 12: Not used
     Terminal 27: Channel 2 analogue output (-)
    Terminal 13: Not used
     Terminal 28: Not used
    Terminal 14: Not used
     Terminal 29: Channel 1 analogue output (+)
    Terminal 15: Not used
     Terminal 30: Channel 1 analogue output (-)

    Instrument Power Supply
    • 24VDC (18-36VDC) or 85 to 265VAC 47 to 63 Hertz
    Transducer Power Supply
    • 24VDC at 30mA for powering 2 wire transmitters
    Weight
    • 400 Grams
    Case Dimensions
    • Width 100mm
    • Height 75mm
    • Depth 110mm
    Mounting Details
    • Din rail mounting on C rail
    Options
    • Weatherproof enclosure
    • Extended isolation to 1500 volts
    Ordering Information
    • Model/input/output/power supply/options.
    • Sample number ISCX3/4-20mAx3/VAC.